3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Quality Magazine

Techniques to improve quality on the shop floor and in manufacturing planning.

Autonomous Vehicle Engineering

The No. 1 media source for those developing the next generation mobility solutions.

Laser Focus World

Semiconductors, medical equipment, lasers, optics and aviation and aerospace.

more free magazines
Glossary » Materials » Polymers » Allyl Resin » DAP » Mineral Filled » Molding Compound
Mineral Filled Molding Compound Allyl is a subcategory of Allyl Resin. The additative is added during the manufacturing process. Its elastic modulus ranges from 1200 to 2200 MPa. Its flexural modulus ranges from 1000 to 1400 MPa. Its tensile strength ranges from 5000 to 8000 MPa at break. Its flexural strength ranges from 8500 to 11000 MPa. Its compressive strength ranges from 20000 to 32000 MPa. Its Izod Impact strength ranges from 0.3 to 0.8 J/cm. Its elongation at break ranges from 3 to 5 %. Its hardness ranges from 60 to 80 Rockwell E. Its specific gravity ranges from 1.65 to 1.85. Its coefficient of thermal expansion ranges from 10 to 42 x 10-6/°C. Its molding pressure ranges from 2.5 to 5 MPa.
Allyl Resin, also known as Allyl, is a thermoset polycondensate. DAP Allyl is commonly used in molding compounds.
Additional Information
Other common Allyl Resin (Allyl) include Cast Sheet Allyl, and Glass Filled Molding Compound Allyl.
Related Pages