Salary Expectation

8 things to know about the interview question "What's your salary expectation"?

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

STEM Career Outlook

Wages, employment opportunities, and growth projections for STEM jobs.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

more free publications
Glossary » Materials » Polymers » Fluoroplastics » Unfilled
Unfilled PTFE is a subcategory of Fluoroplastics. The additative is added during the manufacturing process. Its elongation at break ranges from 100 to 400 %. Its molding pressure ranges from 2 to 20 MPa.
Fluoroplastics, also known as PTFE, is a thermoplastic polymer. The most common trade name is Teflon. modified PE-TFE It has low mechanical strength and is expensive. It has very low coefficient of friction. PTFE is commonly used in applications needing excellent dielectric strength and chemical and temperature resistance.
Additional Information
Other common Fluoroplastics (PTFE) include PTFE, Granular PTFE, 25% Glass Fiber Reinforced PTFE, PTFE, Unfilled PTFE, 20% Milled Glass Fiber PTFE, Unfilled Film PTFE, Filled Film PTFE, Molding and Extrusion PTFE, Wire and Cable Jacketing PTFE, 30% PAN Carbon Fiber EMI Shilding (conductive) PTFE, 25% Glass Fiber Reinforced PTFE, PTFE, PTFE, PTFE, and PE-CTFE PTFE.
Related Pages
Salary Expectation

8 things to know about the interview question "What's your salary expectation"?

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

STEM Career Outlook

Wages, employment opportunities, and growth projections for STEM jobs.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.