Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Wind Systems

Towers, turbines, gearboxes; processes for shaping and finishing component parts.

Power Transmission

Gear drives, bearings, motors, clutches, couplings, machine controls, sensors and components.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

more free magazines

Materials

Design

Processes

Units

Formulas

Math
Glossary » Materials » Polymers » Polycarbonate » Unfilled » Molding and Extrusion Resins, Low Viscosity
Unfilled Molding and Extrusion Resins, Low Viscosity PC is a subcategory of Polycarbonate. The additative is added during the manufacturing process. Its flexural modulus ranges from 330 to 340 MPa. Its tensile strength ranges from 9100 to 10500 MPa at break. Its flexural strength ranges from 12000 to 14000 MPa. Its compressive strength ranges from 10000 to 12500 MPa. Its Izod Impact strength ranges from 12 to 16 J/cm. Its elongation at break ranges from 110 to 150 %. Its hardness ranges from 70 to 75 Rockwell M. Its molding pressure ranges from 8 to 15 MPa.
Polycarbonate, also known as PC, is a thermoplastic polycondensate. Common trade names are Lexan and Makrolon. It has excellent strength, toughness, dimensional stability, dielectric strength, flame retardancy, and impact resistance (highest among transparent rigid materials). It is, however, susceptible to stress cracking with aromatic solvents, and is difficult to machine. PC can be used to make optical lenses, windows, medical items, CD's, and power tool housings. It can also be used in truck cabs.
Additional Information
Other common Polycarbonate (PC) include Unfilled Molding and Extrusion Resins, High Viscosity PC, 10% Glass Fiber Reinforced PC, 30% Glass Fiber Reinforced PC, 20 - 30% Long Glass Fiber Reinforced PC, 40% Long Glass Fiber Reinforced PC, 50% Long Glass Fiber Reinforced PC, 35% Random Glass Mat PC, 20 - 30% Long Glass Fiber Reinforced Flame-Retardant Grade PC, Polyester Copolymer High Heat PC, Polycarbonate Copolymer High Heat PC, Polycarbonate / Polyester Blends, Impact Modified PC, 6% Stainless Steel Fiber Conductive PC, 10% Stainless Steel Fiber EMI Shielding (conductive) PC, 20% PAN Carbon Fiber EMI Shielding (conductive) PC, 30% PAN Carbon Fiber EMI Shielding (conductive) PC, 40% PAN Carbon Fiber EMI Shielding (conductive) PC, 10-15% PTFE Lubricated PC, 30% PTFE Lubricated PC, 10-15% PTFE, 20% Fiber Reinforced Lubricated PC, and 2% Silicone, 30% Glass Fiber Reinforced Lubricated PC.
Related Pages