3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

more free magazines

Materials

Design

Processes

Units

Formulas

Math
Glossary » Materials » Polymers » Polyester » Cast » Rigid
Rigid Polyester is a subcategory of Polyester. It is specially formulated to rigid. Its elastic modulus ranges from 300 to 640 MPa. Its flexural modulus ranges from 490 to 610 MPa. Its tensile strength ranges from 600 to 13000 MPa at break. Its flexural strength ranges from 8500 to 23000 MPa. Its compressive strength ranges from 13000 to 30000 MPa. Its Izod Impact strength ranges from 0.2 to 0.4 J/cm. Its elongation at break ranges from 1 to 2.6 %. Its hardness ranges from 35 to 75 . Its specific gravity ranges from 1.04 to 1.46. Its coefficient of thermal expansion ranges from 55 to 100 x 10-6/°C.
Polyester is a thermoplastic or thermoset polycondensate. Common trade names are Valox and Celanex. cast It has excellent dimensional stability, high dielectric strength, and good toughness. It has moderate chemical resistance, low resistance to strong acids and bases, and is notch sensitive. However, it is not recommended for outdoor use or in hot water. Polyester is very popular in making clothing and handles.
Additional Information
Other common Polyester include Flexible Polyester, Glass Fiber Reinforced High Polyester, Glass Fiber Reinforced, Unidirectional Glass Polyester, Glass Fiber Reinforced, Preformed Chopped Roving Polyester, Glass Fiber Reinforced, Premix Chopped Glass Polyester, Glass Fiber Reinforced, Woven Cloth Polyester, Glass Fiber Reinforced SMC Polyester, Glass Fiber Reinforced SMC, BMC Low Density Polyester, Glass Fiber Reinforced SMC Low Pressure Polyester, Glass Fiber Reinforced SMC Low Shrink Polyester, Glass Fiber Reinforced BMC, TMC Polyester, EMI Shielding (conductive), SMC & TMC Polyester, EMI Shielding (conductive), BMC Polyester, and 50% Glass Fiber Reinforced High Strength SMC Polyester.
Related Pages
FREE Magazines
3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

more publications