Glossary » Materials » Polymers » Polyethersulfone » 20% Mineral Filled
20% Mineral Filled PES is a subcategory of Polyethersulfone. The additative is added by weight during the manufacturing process. Its elongation at break ranges from 5 to 1.4 %.
Polyethersulfone, also known as PES, is a thermoplastic polycondensate. It is rigid with high strength, transparent, and it retains its properties between 100°C and 150 °C. It has very high dimensional stability with reproducible properties and controllable size of pores. PES is commonly used as membrane filters in applications such as hemodialysis, waste water recovery, food and beverage processing, and gas separation. Polysulfone has the highest service temperature of all melt-processable thermoplastics.
Additional Information
Other common Polyethersulfone (PES) include 10% Glass Fiber Reinforced PES, 20-30% Glass Fiber Reinforced PES, 30% Carbon Filled PES, and Reinforced PES.
Related Glossary Pages
Glossary: Materials: Alloys: Aluminum Alloy: Cast
Glossary: Materials: Alloys: Magnesium Alloy: ASTM HZ32A-T5
Glossary: Design: Oring: Material: Fluorosilicone
Glossary: Materials: Alloys: Aluminum Alloy: Cast: A384.0
Glossary: Materials: Alloys: Steel: Alloy Steel: AISI 4626
Glossary: Materials: Alloys: Copper Alloy: Cast
Glossary: Materials: Alloys: Aluminum Alloy: Wrought: AA 7050
Glossary: Materials: Alloys: Steel: Stainless Steel: Monit
Glossary: Materials: Alloys: Copper Alloy: Wire
Glossary: Materials: Polymers: Polycarbonate: 10-15% PTFE, 20% Fiber Reinforced: Lubricated
Glossary: Materials: Alloys: Magnesium Alloy: ASTM HZ32A-T5
Glossary: Design: Oring: Material: Fluorosilicone
Glossary: Materials: Alloys: Aluminum Alloy: Cast: A384.0
Glossary: Materials: Alloys: Steel: Alloy Steel: AISI 4626
Glossary: Materials: Alloys: Copper Alloy: Cast
Glossary: Materials: Alloys: Aluminum Alloy: Wrought: AA 7050
Glossary: Materials: Alloys: Steel: Stainless Steel: Monit
Glossary: Materials: Alloys: Copper Alloy: Wire
Glossary: Materials: Polymers: Polycarbonate: 10-15% PTFE, 20% Fiber Reinforced: Lubricated
Related Pages
Properties of Common Solid Materials
Further information on a specific material can be obtained by clicking the name of that particular material in the following table. ...
eFunda Polymers: Listing of Polyamide (Ultramid, Zytel)
Polyamide, nylon (PA 66), 20-25% glass fiber reinforced, flame-retardant grade. ... Polyamide, nylon (PA 46), 50% glass and mineral filled. ...
eFunda: Introduction to Porous Media Molding
Polyethylene (PE); Polypropylene (PP); Polystyrene (PS); Polyethersulfone (PES); Nylon (Polyamide, PA); Polytetrafluouroethylene (PTFE) ...
eFunda Polymers: Listing of Liquid Crystal Polymer (Vectra, Xydar)
Liquid Crystal Polymer, also known as LCP, has been mass-produced since 1980. ... Liquid Crystal Polymer, glass fiber reinforced, used for SMT. ...
eFunda: Polymer (Plastic) Supplier Contact Information
Polyethersulfone, 20-30% glass fiber reinforced. BASF Corp. 3000 Continental Drive North. Mount Olive, NJ 07828. Toll Free: 800-BC-RESIN. FAX: 800-TOP-FAX1 ...
eFunda Polymers: Properties of Polyethersulfone {reinforced}
eFunda Polymers: Properties of Polyethersulfone {reinforced}
eFunda: Piezo Material Data
Select specific piezoelectric material to view constitutive properties.
eFunda Polymers: Listing of Polyester (Valox, Celanex)
Polyester / alkyd, thermoset, alkyd, mineral filled, molding compounds, ... Polyester (thermoplastic), poly(ethylene-terephthalate), 15-20% glass, ...
eFunda Polymers: Properties of Liquid Crystal Polymer {unfilled ...
eFunda Polymers: Properties of Liquid Crystal Polymer {unfilled, medium melting point}
eFunda: Polymer (Plastic) Supplier Contact Information
Ashley Polymers. 5114 Ft. Hamilton Pkwy. Brooklyn, NY 11219. Phone: 718-851-8111 ... Bamberger Polymers, Inc. 2 Jericho Plaza. Jericho, NY 11753 ...
