3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Salary Expectation

8 things to know about the interview question "What's your salary expectation"?

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

more free magazines

Materials

Design

Processes

Units

Formulas

Math
Glossary » Materials » Polymers » Polyphenylene Sulfide » 10-20% Glass Fiber Reinforced
10-20% Glass Fiber Reinforced PPS is a subcategory of Polyphenylene Sulfide. The additative is added by weight during the manufacturing process. Its elastic modulus ranges from 850 to 1200 MPa. Its flexural modulus ranges from 900 to 1200 MPa. Its tensile strength ranges from 7500 to 14000 MPa at break. Its flexural strength ranges from 9500 to 20000 MPa. Its compressive strength ranges from 17000 to 20000 MPa. Its Izod Impact strength ranges from 0.7 to 1.2 J/cm. Its elongation at break ranges from 1 to 1.5 %. Its specific gravity ranges from 1.39 to 1.47. Its coefficient of thermal expansion ranges from 16 to 20 x 10-6/°C. Its melting temperature ranges from 275 to 285 °C.
Polyphenylene Sulfide, also known as PPS, is a thermoplastic polycondensate. The most common trade name is Ryton. It has high temperature resistance (230 ºC continuous), low temperature endurance, good chemical resistance, and flame retardance. PPS can be used to make high performance electrical connectors and other high stress parts.
Additional Information
Other common Polyphenylene Sulfide (PPS) include Unfilled PPS, 30% Glass Fiber Reinforced PPS, 40% Glass Fiber Reinforced PPS, 53% Glass / Mineral Reinforced High Elongation and Impact PPS, 30% Glass Fiber, 15% PTFE PPS, 30% Long Glass Fiber Reinforced PPS, 40% Long Glass Fiber Reinforced PPS, 50% Long Glass Fiber Reinforced PPS, 60% Long Glass Fiber Reinforced PPS, 65% Mineral and Glass Filled PPS, 50% Glass and Mineral Reinforced PPS, 55% Glass and Mineral Reinforced PPS, 60% Glass and Mineral Reinforced PPS, Encapsulation Grades PPS, 60% Stainless Steel EMI Shielding (conductive) PPS, 30% Carbon Fiber EMI Shielding (conductive) PPS, 40% PAN Carbon Fiber EMI Shielding (conductive) PPS, and 30% PAN Carbon Fiber, 15% PTFE EMI Shielding (conductive) PPS.
Related Pages
FREE Magazines
3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Salary Expectation

8 things to know about the interview question "What's your salary expectation"?

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

more publications