World Pumps

Major news, innovation and real-life applications for pumps and ancillary equipment.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Power Transmission

Gear drives, bearings, motors, clutches, couplings, machine controls, sensors and components.

more free magazines

Materials

Design

Processes

Units

Formulas

Math
Glossary » Materials » Polymers » Polyphenylene Sulfide » 50% Glass and Mineral Reinforced
50% Glass and Mineral Reinforced PPS is a subcategory of Polyphenylene Sulfide. The additative is added by weight during the manufacturing process. Its flexural modulus ranges from 2240 to 2400 MPa. Its tensile strength ranges from 18000 to 22000 MPa at break. Its flexural strength ranges from 28000 to 33700 MPa. Its Izod Impact strength ranges from 0.8 to 1.3 J/cm. Its elongation at break ranges from 1 to 3.5 %. Its specific gravity ranges from 1.78 to 1.8. Its coefficient of thermal expansion ranges from 12.2 to 14.6 x 10-6/°C. Its molding pressure ranges from 4 to 12 MPa.
Polyphenylene Sulfide, also known as PPS, is a thermoplastic polycondensate. The most common trade name is Ryton. It has high temperature resistance (230 ºC continuous), low temperature endurance, good chemical resistance, and flame retardance. PPS can be used to make high performance electrical connectors and other high stress parts.
Additional Information
Other common Polyphenylene Sulfide (PPS) include Unfilled PPS, 10-20% Glass Fiber Reinforced PPS, 30% Glass Fiber Reinforced PPS, 40% Glass Fiber Reinforced PPS, 53% Glass / Mineral Reinforced High Elongation and Impact PPS, 30% Glass Fiber, 15% PTFE PPS, 30% Long Glass Fiber Reinforced PPS, 40% Long Glass Fiber Reinforced PPS, 50% Long Glass Fiber Reinforced PPS, 60% Long Glass Fiber Reinforced PPS, 65% Mineral and Glass Filled PPS, 55% Glass and Mineral Reinforced PPS, 60% Glass and Mineral Reinforced PPS, Encapsulation Grades PPS, 60% Stainless Steel EMI Shielding (conductive) PPS, 30% Carbon Fiber EMI Shielding (conductive) PPS, 40% PAN Carbon Fiber EMI Shielding (conductive) PPS, and 30% PAN Carbon Fiber, 15% PTFE EMI Shielding (conductive) PPS.
Related Pages