Chemical Engineering

The industry gateway for chemical engineering and plant operations.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Autonomous Vehicle Engineering

The No. 1 media source for those developing the next generation mobility solutions.

more free magazines

Materials

Design

Processes

Units

Formulas

Math
Glossary » Materials » Polymers » Polyphenylene Sulfide » Unfilled
Unfilled PPS is a subcategory of Polyphenylene Sulfide. The additative is added during the manufacturing process. Its flexural modulus ranges from 550 to 600 MPa. Its tensile strength ranges from 7000 to 12500 MPa at break. Its flexural strength ranges from 14000 to 21000 MPa. Its elongation at break ranges from 1 to 6 %. Its hardness ranges from 123 to 125 Rockwell R. Its coefficient of thermal expansion ranges from 27 to 49 x 10-6/°C. Its molding pressure ranges from 5 to 15 MPa.
Polyphenylene Sulfide, also known as PPS, is a thermoplastic polycondensate. The most common trade name is Ryton. It has high temperature resistance (230 ºC continuous), low temperature endurance, good chemical resistance, and flame retardance. PPS can be used to make high performance electrical connectors and other high stress parts.
Additional Information
Other common Polyphenylene Sulfide (PPS) include 10-20% Glass Fiber Reinforced PPS, 30% Glass Fiber Reinforced PPS, 40% Glass Fiber Reinforced PPS, 53% Glass / Mineral Reinforced High Elongation and Impact PPS, 30% Glass Fiber, 15% PTFE PPS, 30% Long Glass Fiber Reinforced PPS, 40% Long Glass Fiber Reinforced PPS, 50% Long Glass Fiber Reinforced PPS, 60% Long Glass Fiber Reinforced PPS, 65% Mineral and Glass Filled PPS, 50% Glass and Mineral Reinforced PPS, 55% Glass and Mineral Reinforced PPS, 60% Glass and Mineral Reinforced PPS, Encapsulation Grades PPS, 60% Stainless Steel EMI Shielding (conductive) PPS, 30% Carbon Fiber EMI Shielding (conductive) PPS, 40% PAN Carbon Fiber EMI Shielding (conductive) PPS, and 30% PAN Carbon Fiber, 15% PTFE EMI Shielding (conductive) PPS.
Related Pages