Glossary » Materials » Polymers » Silicone » Copolymer » Silicone / Nylon 12 » Psuedo-Interpenetrating Networks

Silicone / Nylon 12 Psuedo-Interpenetrating Networks SI is a subcategory of Silicone. The additative is added during the manufacturing process. Its flexural modulus ranges from 200 to 216 MPa. Its tensile strength ranges from 5200 to 7400 MPa at break. Its flexural strength ranges from 8000 to 8300 MPa. Its Izod Impact strength ranges from 0.6 to 0.7 J/cm. Its specific gravity ranges from 1.01 to 1.02. Its molding pressure ranges from 7 to 12 MPa.
Silicone, also known as SI, is a thermoset polycondensate. Common trade names include Baysilon, Blu-Sil, Commex, Fiberite, Lamitex, Siltemp, and Textolite. copolymer It maintains its dimensional stability and good electrical and dielectrical properties over a wide range of frequency and temperature. Other useful properties include good flame resistance, low water absorption, moderate thermal shock resistance, and average polymeric mechanical properties. On the other hand, it is high-cost with limited shelf-life and a long curing time. It is often used in computer chips, IC’s, cooking ware, and food containers.
Additional Information

Other common Silicone (SI) include Flexible Casting Resins (including RTV) SI, Liquid Silicone Rubber Injection Molding SI, Mineral And/or Glass Filled Molding and Encapsulating Compounds SI, and Silicone / Nylon 66 Psuedo-Interpenetrating Networks SI.
Related Glossary Pages

Glossary: Materials: Alloys: Steel: Alloy Steel: ASTM A734 Type B
Glossary: Materials: Alloys: Steel: Alloy Steel
Glossary: Materials: Alloys: Copper Alloy: Cast: UNS C91700
Glossary: Materials: Alloys: Steel: Alloy Steel: ASTM A517 Grade J
Glossary: Materials: Polymers: Epoxy: Flexibilized
Glossary: Materials: Polymers: Polyphthalamide: 40% Mineral Reinforced, Heat Stablized
Glossary: Materials: Alloys: Steel: Carbon Steel: AISI 15B35H
Glossary: Materials: Alloys: Steel: Tool Steel
Glossary: Materials: Alloys: Copper Alloy: Cast
Glossary: Materials: Alloys: Steel: Alloy Steel
Glossary: Materials: Alloys: Steel: Alloy Steel
Glossary: Materials: Alloys: Copper Alloy: Cast: UNS C91700
Glossary: Materials: Alloys: Steel: Alloy Steel: ASTM A517 Grade J
Glossary: Materials: Polymers: Epoxy: Flexibilized
Glossary: Materials: Polymers: Polyphthalamide: 40% Mineral Reinforced, Heat Stablized
Glossary: Materials: Alloys: Steel: Carbon Steel: AISI 15B35H
Glossary: Materials: Alloys: Steel: Tool Steel
Glossary: Materials: Alloys: Copper Alloy: Cast
Glossary: Materials: Alloys: Steel: Alloy Steel
Related Pages

eFunda: Chemicals Compatibile with O-Ring Material Silicone
Chemicals Compatible with Silicone (select a chemical to show its compatible O-ring materials). Acetaldehyde (4), Acetamide (2), Acetic Acid, Glacial (4) ...
eFunda Polymers: Properties of Epoxy {bisphenol, low density ...
Cytec Fiberite, Inc. Tempe, AZ. Top of Page. Related Glossary. Materials » Alloys » Steel » Stainless Steel » 18SR · Materials » Alloys » Steel » Stainless ...
eFunda Polymers: Properties of Phenolic {phenol-formaldehyde, high ...
Cytec Fiberite, Inc. Tempe, AZ. Occidental Chemical Corp. Dallas, TX, 800-578-8880. Plastics Engineering, Inc. Auburn Hills, MI ...
eFunda: Glossary: Units: Mechanical Impedance: Ohm (mechanical, SI)
eFunda Glossary for Units, Category:Mechanical Impedance, Unit name: Ohm (mechanical, SI)
eFunda Polymers: Properties of Silicone {copolymer, silicone ...
eFunda Polymers: Properties of Silicone {copolymer, silicone / nylon 12, psuedo-interpenetrating networks}
eFunda Polymers: Properties of Epoxy {mineral and glass filled ...
Cosmic Plastics, Inc. Valencia, CA, 800-423-5613. Cytec Fiberite, Inc. Tempe, AZ. Rogers Corp. Rogers, CT, 800-227-6437 ...
eFunda: General Information on Element Silicon
Download a Palm version of eFunda's periodic table! Silicon. 14. Si 28.0855, Atomic Number, 14. Atomic Weight, 28.0855. Electron Config. 2-2-6-2-2 ...
eFunda Polymers: Properties of Silicone {flexible casting resins ...
eFunda Polymers: Properties of Silicone {flexible casting resins (including RTV)}
eFunda Polymers: Properties of Silicone {Liquid silicone rubber ...
eFunda Polymers: Properties of Silicone {Liquid silicone rubber injection molding}
Listing of Comments on Conversion Factors: SI Units and Many ...
Listing of Comments on Conversion Factors: SI Units and Many Others by Pennycuick, CJ.