Glossary » Materials » Polymers » Silicone » Copolymer » Silicone / Nylon 66 » Psuedo-Interpenetrating Networks

Silicone / Nylon 66 Psuedo-Interpenetrating Networks SI is a subcategory of Silicone. The additative is added during the manufacturing process. Its flexural modulus ranges from 360 to 410 MPa. Its tensile strength ranges from 10100 to 12500 MPa at break. Its flexural strength ranges from 14000 to 15900 MPa. Its Izod Impact strength ranges from 0.8 to 0.9 J/cm. Its elongation at break ranges from 5 to 20 %. Its specific gravity ranges from 1.12 to 1.13. Its molding pressure ranges from 8 to 15 MPa.
Silicone, also known as SI, is a thermoset polycondensate. Common trade names include Baysilon, Blu-Sil, Commex, Fiberite, Lamitex, Siltemp, and Textolite. copolymer It maintains its dimensional stability and good electrical and dielectrical properties over a wide range of frequency and temperature. Other useful properties include good flame resistance, low water absorption, moderate thermal shock resistance, and average polymeric mechanical properties. On the other hand, it is high-cost with limited shelf-life and a long curing time. It is often used in computer chips, IC’s, cooking ware, and food containers.
Additional Information

Other common Silicone (SI) include Flexible Casting Resins (including RTV) SI, Liquid Silicone Rubber Injection Molding SI, Mineral And/or Glass Filled Molding and Encapsulating Compounds SI, and Silicone / Nylon 12 Psuedo-Interpenetrating Networks SI.
Related Glossary Pages

Glossary: Materials: Alloys: Steel: Carbon Steel
Glossary: Materials: Alloys: Copper Alloy: Cast: UNS C93700
Glossary: Materials: Alloys: Steel: Alloy Steel
Glossary: Materials: Alloys: Steel: Carbon Steel: ASTM A620
Glossary: Materials: Alloys: Steel: Stainless Steel: AISI Type 410Cb
Glossary: Materials: Alloys: Steel: Carbon Steel: AISI 12L14
Glossary: Materials: Alloys: Copper Alloy: Wrought: UNS C75200
Glossary: Materials: Polymers: Polyamide: Nylon (PA 66): 60% Long Glass Fiber Reinforced
Glossary: Materials: Alloys: Steel: Carbon Steel
Glossary: Materials: Polymers: Polycarbonate: 2% Silicone, 30% Glass Fiber Reinforced
Glossary: Materials: Alloys: Copper Alloy: Cast: UNS C93700
Glossary: Materials: Alloys: Steel: Alloy Steel
Glossary: Materials: Alloys: Steel: Carbon Steel: ASTM A620
Glossary: Materials: Alloys: Steel: Stainless Steel: AISI Type 410Cb
Glossary: Materials: Alloys: Steel: Carbon Steel: AISI 12L14
Glossary: Materials: Alloys: Copper Alloy: Wrought: UNS C75200
Glossary: Materials: Polymers: Polyamide: Nylon (PA 66): 60% Long Glass Fiber Reinforced
Glossary: Materials: Alloys: Steel: Carbon Steel
Glossary: Materials: Polymers: Polycarbonate: 2% Silicone, 30% Glass Fiber Reinforced
Related Pages

eFunda: Glossary: Units: Acoustic Impedance: Ohm (acoustic, SI)
eFunda Glossary for Units, Category:Acoustic Impedance, Unit name: Ohm (acoustic, SI)
eFunda Polymers: Properties of Silicone {flexible casting resins ...
eFunda Polymers: Properties of Silicone {flexible casting resins (including RTV)}
Silicone Rubber Molding (SRM, RTV Molding)
Silicone Rubber, 15 - 100. Low Melt Metal Alloy, 15 - 90. Polyurethane Foam, 5 - 250 ... RTV Silicone Rubber Molding Process Description ...
eFunda Polymers: Properties of Epoxy {bisphenol, glass fiber ...
Amoco Electronic Materials, Alpharetta, GA. Cytec Fiberite, Inc. Tempe, AZ. Top of Page. Related Glossary. Materials » Alloys » Copper Alloy » Cast » UNS ...
eFunda Polymers: Properties of Phenolic {phenol-formaldehyde ...
Cytec Fiberite, Inc. Tempe, AZ. Occidental Chemical Corp. Dallas, TX, 800-578-8880. Plaslok Corp. Buffalo, NY, 800-828-7913 ...
eFunda: Polymer (Plastic) Supplier Contact Information
Cytec Fiberite, Inc. 2055 E Tech center. Tempe, AZ 85284. Phone: 602-730-2000. FAX: 602-730-2390. Web: www.cytec.com ...
efunda: SI Unit Prefixes
A table of unit prefixes such as deci, milli, micro, kilo, and mega in the SI system.
eFunda Polymers: Properties of Silicone {Liquid silicone rubber ...
eFunda Polymers: Properties of Silicone {Liquid silicone rubber injection molding}
eFunda: Properties of Titanium Alloy Ti-5Al-5Sn-2Zr-2Mo-0.25Si
eFunda: Properties of Titanium Alloy Ti-5Al-5Sn-2Zr-2Mo-0.25Si.
eFunda Polymers: Properties of Epoxy {mineral and glass filled ...
Cosmic Plastics, Inc. Valencia, CA, 800-423-5613. Cytec Fiberite, Inc. Tempe, AZ. Rogers Corp. Rogers, CT, 800-227-6437 ...