Desktop Engineering

Design, simulation, test, prototyping and high performance computing.

Autonomous Vehicle Engineering

The No. 1 media source for those developing the next generation mobility solutions.

Salary Expectation

8 things to know about the interview question "What's your salary expectation"?

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

more free magazines
Glossary » Materials » Polymers » Thermoplastic Elastomers » Block Copolymer of Styrene and Ethylene And/or Butylene
TPE is a subcategory of Thermoplastic elastomers. Its flexural modulus ranges from 0.1 to 100 MPa. Its tensile strength ranges from 600 to 3000 MPa at break. Its flexural strength ranges from 0.1 to 100 MPa. Its elongation at break ranges from 600 to 940 %. Its hardness ranges from 63 to 75 Shore D. Its specific gravity ranges from 0.9 to 1.2. Its molding pressure ranges from 1.5 to 20 MPa.
Thermoplastic elastomers, also known as TPE, is a thermoplastic. block copolymer of styrene and ethylene and/or butylene
Additional Information
Other common Thermoplastic elastomers (TPE) include Low and Medium Hardness TPE, High Hardness TPE, TPE, TPE, TPE, TPE, Psuedo-Interpenetrating Networks TPE, Psuedo-Interpenetrating Networks TPE, Pseudo-Interpenetrating Networks TPE, Pseudo-Interpenetrating Networks TPE, Aromatic and Aliphatic Polyether and Polyester Urethane, Unfilled Pseudo-Interpenetrating Networks TPE, Aromatic Polyether Urethane, 15% Carbon Fiber Reinforced Pseudo-Interpenetrating Networks TPE, Polyester Compound Molding and Extrusion Compounds, Low and Medium Hardness TPE, Polyester Compound Molding and Extrusion Compounds, High Hardness TPE, Polyether Compound Molding and Extrusion Compounds, Low and Medium Hardness TPE, Polyether Compound Molding and Extrusion Compounds, High Hardness TPE, Low and Medium Hardness TPE, and High Hardness TPE.
Related Pages