Autonomous Vehicle Engineering

The No. 1 media source for those developing the next generation mobility solutions.

Wind Systems

Towers, turbines, gearboxes; processes for shaping and finishing component parts.

Chemical Engineering

The industry gateway for chemical engineering and plant operations.

Offshore

International news and technology for marine/offshore operations around the world.

more free magazines

Materials

Design

Processes

Units

Formulas

Math
Glossary » Materials » Polymers » Thermoplastic Elastomers » Polyolefin » High Hardness
High Hardness TPE is a subcategory of Thermoplastic elastomers. It is specially formulated to high hardness. Its elastic modulus ranges from 0.34 to 34.1 MPa. Its flexural modulus ranges from 2.7 to 300 MPa. Its tensile strength ranges from 950 to 4000 MPa at break. Its compressive strength ranges from 22 to 39 MPa. Its Izod Impact strength ranges from 5 to 16 J/cm. Its elongation at break ranges from 20 to 600 %. Its hardness ranges from 40 to 70 Shore D. Its specific gravity ranges from 0.9 to 1.15. Its coefficient of thermal expansion ranges from 36 to 110 x 10-6/°C. Its melting temperature ranges from 163 to 165 °C. Its molding pressure ranges from 6 to 10 MPa.
Thermoplastic elastomers, also known as TPE, is a thermoplastic. polyolefin
Additional Information
Other common Thermoplastic elastomers (TPE) include Low and Medium Hardness TPE, TPE, TPE, TPE, TPE, TPE, Psuedo-Interpenetrating Networks TPE, Psuedo-Interpenetrating Networks TPE, Pseudo-Interpenetrating Networks TPE, Pseudo-Interpenetrating Networks TPE, Aromatic and Aliphatic Polyether and Polyester Urethane, Unfilled Pseudo-Interpenetrating Networks TPE, Aromatic Polyether Urethane, 15% Carbon Fiber Reinforced Pseudo-Interpenetrating Networks TPE, Polyester Compound Molding and Extrusion Compounds, Low and Medium Hardness TPE, Polyester Compound Molding and Extrusion Compounds, High Hardness TPE, Polyether Compound Molding and Extrusion Compounds, Low and Medium Hardness TPE, Polyether Compound Molding and Extrusion Compounds, High Hardness TPE, Low and Medium Hardness TPE, and High Hardness TPE.
Related Pages