Glossary » Materials » Polymers » Thermoplastic Elastomers » Polyolefin » Low and Medium Hardness

Low and Medium Hardness TPE is a subcategory of Thermoplastic elastomers. It is specially formulated to low and medium hardness. Its elastic modulus ranges from 1.1 to 16.4 MPa. Its flexural modulus ranges from 1.5 to 30 MPa. Its tensile strength ranges from 650 to 2500 MPa at break. Its elongation at break ranges from 150 to 780 %. Its hardness ranges from 64 to 92 Shore A. Its specific gravity ranges from 0.88 to 0.98. Its molding pressure ranges from 4 to 19 MPa.
Thermoplastic elastomers, also known as TPE, is a thermoplastic. polyolefin
Additional Information

Other common Thermoplastic elastomers (TPE) include High Hardness TPE, TPE, TPE, TPE, TPE, TPE, Psuedo-Interpenetrating Networks TPE, Psuedo-Interpenetrating Networks TPE, Pseudo-Interpenetrating Networks TPE, Pseudo-Interpenetrating Networks TPE, Aromatic and Aliphatic Polyether and Polyester Urethane, Unfilled Pseudo-Interpenetrating Networks TPE, Aromatic Polyether Urethane, 15% Carbon Fiber Reinforced Pseudo-Interpenetrating Networks TPE, Polyester Compound Molding and Extrusion Compounds, Low and Medium Hardness TPE, Polyester Compound Molding and Extrusion Compounds, High Hardness TPE, Polyether Compound Molding and Extrusion Compounds, Low and Medium Hardness TPE, Polyether Compound Molding and Extrusion Compounds, High Hardness TPE, Low and Medium Hardness TPE, and High Hardness TPE.
Related Glossary Pages

Glossary: Materials: Alloys: Copper Alloy: Wrought: UNS C10500
Glossary: Materials: Polymers: Thermoplastic Elastomers: Silicone / Polyamide: Psuedo-Interpenetrating Networks
Glossary: Materials: Polymers: Cellulosic: Ethyl Cellulose: Molding Compound and Sheet
Glossary: Materials: Polymers: Fluoroplastics: Perfluoro-Alkoxyalkane (PFA)
Glossary: Materials: Alloys: Copper Alloy: Cast
Glossary: Materials: Alloys: Aluminum Alloy: Cast
Glossary: Materials: Polymers: Polyamide: Nylon (PA 66): 15% Nickel Coated Carbon Fiber: EMI Shielding (conductive)
Glossary: Materials: Alloys: Steel: Alloy Steel: AISI 4037H
Glossary: Materials: Alloys: Steel: Alloy Steel: AISI 8720H
Glossary: Materials: Alloys: Copper Alloy: Wire: AWG-2/0
Glossary: Materials: Polymers: Thermoplastic Elastomers: Silicone / Polyamide: Psuedo-Interpenetrating Networks
Glossary: Materials: Polymers: Cellulosic: Ethyl Cellulose: Molding Compound and Sheet
Glossary: Materials: Polymers: Fluoroplastics: Perfluoro-Alkoxyalkane (PFA)
Glossary: Materials: Alloys: Copper Alloy: Cast
Glossary: Materials: Alloys: Aluminum Alloy: Cast
Glossary: Materials: Polymers: Polyamide: Nylon (PA 66): 15% Nickel Coated Carbon Fiber: EMI Shielding (conductive)
Glossary: Materials: Alloys: Steel: Alloy Steel: AISI 4037H
Glossary: Materials: Alloys: Steel: Alloy Steel: AISI 8720H
Glossary: Materials: Alloys: Copper Alloy: Wire: AWG-2/0
Related Pages

eFunda Polymers: Listing of Liquid Crystal Polymer (Vectra, Xydar)
Liquid Crystal Polymer, also known as LCP, has been mass-produced since 1980. ... Liquid Crystal Polymer, glass fiber reinforced, used for SMT. ...
Heat Treatments: Direct Hardening
Hardness is a function of the Carbon content of the steel. ... Most medium carbon steels and low alloy steels undergo transformation to 100% Martensite at ...
eFunda: Convert Hardness: Mohs
Devised by Austrian mineralogist Frederick Mohs in 1822, Mohs' Hardness is applied to ... Common Mohs' testing kits consist of low cost specimens of the 10 ...
eFunda Polymers: Listing of Thermoplastic elastomers
Thermoplastic elastomers, block copolymer of styrene and butadiene or styrene and ... Thermoplastic elastomers, silicone / polystyrene ethylene butadiene ...
eFunda: Engineering Materials
Home page for properties of materials such as elements, alloys, polymers, and piezo ceramics.
eFunda: Convert Hardness: Rockwell Superficial 45T
The Rockwell Hardness Test presses a steel or diamond hemisphere-conical ... 100 kgf load, Medium/low hard materials, such as annealed carbon steels. ...
eFunda Polymers: Properties of Polyethylene and ethylene ...
State: low and medium density, branched homopolymer ... Hardness, 44 - 50, Shore D, D638. Izod Impact (J/cm of notch) 1/8" thick specimen unless noted ...
eFunda Polymers: Properties of Thermoplastic elastomers ...
eFunda Polymers: Properties of Thermoplastic elastomers {polyolefin, high hardness}
eFunda Polymers: Properties of Thermoplastic elastomers {silicone ...
eFunda Polymers: Properties of Thermoplastic elastomers {silicone / polyolefin, pseudo-interpenetrating networks}
eFunda Polymers: Properties of Thermoplastic elastomers ...
eFunda Polymers: Properties of Thermoplastic elastomers {elastomeric alloy, low and medium hardness}