Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Selecting the Right 3D Printer

Discover how to choose the right 3D printer for your needs and the key performance attributes to consider.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Mechanical Engineers Outlook

Guide for those interested in becoming a mechanical engineer. Includes qualifications, pay, and job duties.

more free publications
Glossary » Units » Acceleration » Celo
Celo (ft/s2) is a unit in the category of Acceleration. It is also known as celos. This unit is commonly used in the FPS unit system. Celo (ft/s2) has a dimension of LT-2 where L is length, and T is time. It can be converted to the corresponding standard SI unit m/s2 by multiplying its value by a factor of 0.3048.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Acceleration include Centimeter Per Square Second (cm/s2), Foot Per Square Second (ft/s2), G (gravitational Acceleration) (g), Galileo, Inch Per Square Second (in/s2), Kilometer Per Hour Per Second (km/h-s), Leo, Meter Per Square Second (m/s2), Mile (stat.) Per Hour Per Second (mph/s, mi/h-s), and Normal Acceleration (gn).

Additional Information
N/A
Related Pages
Glossary
Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Selecting the Right 3D Printer

Discover how to choose the right 3D printer for your needs and the key performance attributes to consider.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Mechanical Engineers Outlook

Guide for those interested in becoming a mechanical engineer. Includes qualifications, pay, and job duties.