Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Quality Magazine

Techniques to improve quality on the shop floor and in manufacturing planning.

more free magazines
Glossary » Units » Acceleration » Leo
Leo is a unit in the category of Acceleration. It is also known as leos. Leo has a dimension of LT-2 where L is length, and T is time. It can be converted to the corresponding standard SI unit m/s2 by multiplying its value by a factor of 10.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Acceleration include Celo (ft/s2), Centimeter Per Square Second (cm/s2), Foot Per Square Second (ft/s2), G (gravitational Acceleration) (g), Galileo, Inch Per Square Second (in/s2), Kilometer Per Hour Per Second (km/h-s), Meter Per Square Second (m/s2), Mile (stat.) Per Hour Per Second (mph/s, mi/h-s), and Normal Acceleration (gn).

Additional Information
N/A
Related Pages
Glossary