Reinforced Plastics

Informed and impartial coverage on the global composites industry.

Negotiate Your Salary

Learn the best principles to negotiate the salary you deserve!

Quality Magazine

Techniques to improve quality on the shop floor and in manufacturing planning.

Chemical Engineering

The industry gateway for chemical engineering and plant operations.

more free magazines
Glossary » Units » Dynamic Viscosity » Dyne Second Per Square Centimeter
Dyne Second Per Square Centimeter (dyn-s/cm2) is a unit in the category of Dynamic viscosity. It is also known as dyne second per square centimeter, dyne second/square centimeter, dyne-second/square centimeter. This unit is commonly used in the cgs unit system. Dyne Second Per Square Centimeter (dyn-s/cm2) has a dimension of ML-1T-1 where M is mass, L is length, and T is time. It can be converted to the corresponding standard SI unit Pa-s by multiplying its value by a factor of 0.1.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Dynamic viscosity include Centipoise (cP, cPo), Gram Force Second Per Square Centimeter (gf-s/cm2), Gram Per Centimeter Per Second (g/cm-s), Kilogram Force Second Per Square Meter (kgf-s/m2), Kilogram Per Meter Per Second (kg/m-s), Newton Second Per Square Meter (N-s/m2), Pascal Second (Pa-s), Poise (P, Po), Poiseuille, Pound Force Second Per Square Foot (lbf-s/ft2), Pound Mass Per Foot Second (lbm/ft-s), Pound Mass Per Inch Second (lbm/in-s), Reynolds (reyns) (reyns (reyn)), Slug Per Foot Second (slug/ft-s), and Slug Per Inch Second (slug/in-s).

Additional Information
N/A
Related Pages
Glossary