Chemical Engineering

The industry gateway for chemical engineering and plant operations.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Laser Focus World

Semiconductors, medical equipment, lasers, optics and aviation and aerospace.

Power Transmission

Gear drives, bearings, motors, clutches, couplings, machine controls, sensors and components.

more free magazines
Glossary » Units » Dynamic Viscosity » Newton Second Per Square Meter
Newton Second Per Square Meter (N-s/m2) is a unit in the category of Dynamic viscosity. It is also known as newton/second-square meter. Newton Second Per Square Meter (N-s/m2) has a dimension of ML-1T-1 where M is mass, L is length, and T is time. It essentially the same as the corresponding standard SI unit Pa-s.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Dynamic viscosity include Centipoise (cP, cPo), Dyne Second Per Square Centimeter (dyn-s/cm2), Gram Force Second Per Square Centimeter (gf-s/cm2), Gram Per Centimeter Per Second (g/cm-s), Kilogram Force Second Per Square Meter (kgf-s/m2), Kilogram Per Meter Per Second (kg/m-s), Pascal Second (Pa-s), Poise (P, Po), Poiseuille, Pound Force Second Per Square Foot (lbf-s/ft2), Pound Mass Per Foot Second (lbm/ft-s), Pound Mass Per Inch Second (lbm/in-s), Reynolds (reyns) (reyns (reyn)), Slug Per Foot Second (slug/ft-s), and Slug Per Inch Second (slug/in-s).

Additional Information
N/A
Related Pages
Glossary