3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Mechanical Engineers Outlook

Guide for those interested in becoming a mechanical engineer. Includes qualifications, pay, and job duties.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

more free publications
Glossary » Units » Dynamic Viscosity » Reynolds (reyns)
Reynolds (reyns) (reyns (reyn)) is a unit in the category of Dynamic viscosity. This unit is commonly used in the FPS unit system. Reynolds (reyns) (reyns (reyn)) has a dimension of ML-1T-1 where M is mass, L is length, and T is time. It can be converted to the corresponding standard SI unit Pa-s by multiplying its value by a factor of 6894.75729449.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Dynamic viscosity include Centipoise (cP, cPo), Dyne Second Per Square Centimeter (dyn-s/cm2), Gram Force Second Per Square Centimeter (gf-s/cm2), Gram Per Centimeter Per Second (g/cm-s), Kilogram Force Second Per Square Meter (kgf-s/m2), Kilogram Per Meter Per Second (kg/m-s), Newton Second Per Square Meter (N-s/m2), Pascal Second (Pa-s), Poise (P, Po), Poiseuille, Pound Force Second Per Square Foot (lbf-s/ft2), Pound Mass Per Foot Second (lbm/ft-s), Pound Mass Per Inch Second (lbm/in-s), Slug Per Foot Second (slug/ft-s), and Slug Per Inch Second (slug/in-s).

Additional Information
N/A
Related Pages
3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Mechanical Engineers Outlook

Guide for those interested in becoming a mechanical engineer. Includes qualifications, pay, and job duties.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.