**Glossary**»

**Units**»

**Electric Resistivity**»

**Ohm-Inch**

**Ohm-Inch (ohm-in)**is a unit in the category of

*Electric resistivity*. It is also known as inches, ohm. Ohm-Inch (ohm-in) has a dimension of MLT

^{-3}I

^{-2}where M is mass, L is length, T is time, and I is electric current. It can be converted to the corresponding standard SI unit ohm-m by multiplying its value by a factor of 0.0254.

Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Electric resistivity include Ohm-Centimeter (ohm-cm), Ohm-Foot (ohm-ft), and Ohm-Meter (ohm-m).

**Additional Information**

N/A

**Related Glossary Pages**

Glossary: Units: Luminous Intensity: Bougie Dècimale

Glossary: Units: Fraction: Carat (karat)

Glossary: Units: Velocity: Centimeter Per Minute

Glossary: Units: Volume Flow Rate: Acre Foot Per Month

Glossary: Units: Luminous Flux: Lumen

Glossary: Units: Specific Fuel Consumption-Energy Ratio: Gallon (US, Liq.) Per Hour-Horsepower

Glossary: Units: Mass Moment of Inertia: Pound Mass-Square Inch

Glossary: Units: Magnetic Permeability: Henry Per Meter

Glossary: Units: Fuel Consumption: Gallon Per Mile

Glossary: Units: Length: Ems (pica)

Glossary: Units: Fraction: Carat (karat)

Glossary: Units: Velocity: Centimeter Per Minute

Glossary: Units: Volume Flow Rate: Acre Foot Per Month

Glossary: Units: Luminous Flux: Lumen

Glossary: Units: Specific Fuel Consumption-Energy Ratio: Gallon (US, Liq.) Per Hour-Horsepower

Glossary: Units: Mass Moment of Inertia: Pound Mass-Square Inch

Glossary: Units: Magnetic Permeability: Henry Per Meter

Glossary: Units: Fuel Consumption: Gallon Per Mile

Glossary: Units: Length: Ems (pica)

**Related Pages**

eFunda: Glossary: Units: Power (Heat Flow): British Thermal Unit ...

eFunda Glossary for Units, Category:Power (Heat Flow), Unit name: British Thermal Unit (therm.) Per Hour, Unit Symbol: Btu (therm.)/h.

Unit Step and Delta Functions
Introduction to Heaviside unit step function and Dirac delta function.

eFunda: Glossary: Units: Electric Current: Ampere
Units » Electric Permittivity » Square Coulomb Per Newton Per Square Meter ... eFunda: Glossary: Units: Electric Resistance: Volt Per Ampere ...

Properties of Common Solid Materials
Electric Properties: Electric resistivity. •, Acoustic Properties: Compression wave velocity, ... Material, Electric Resistivity (×10-9 W·m) ...

Search For Rolled Steel Angles Section
LLEGa inches×LEGb inches×THICKNESS inches. For Example: L4×3×5/8 is an Angle with one 4 inch leg one 3 inch leg and having a thickness of 5/8 of an inch. ...

eFunda: Glossary: Units: Electric Conductivity: Siemens Per Inch
Electric Conductivity Units: Reciprocal Ohm Per Centimeter ... Siemens Per Centimeter (S/cm), Siemens Per Foot (S/ft), Siemens Per Inch (S/in), and Siemens ...

Mechanical Design Guidelines for Bearings
NOTE: When the speed is less than 30 inches/minute, fs = 1. ... (which is a load that corresponds to an L10 life of 10 million inches, provided the factors ...

eFunda: Glossary: Units: Electric Resistance: Abohm (emu of ...
It can be converted to the corresponding standard SI unit ohm by multiplying ... Other units in the category of Electric resistance include Ohm (ohm, W), ...

eFunda: Glossary: Units: Fracture Toughness: Psi-Sqrt(inch)
eFunda Glossary for Units, Category:Fracture Toughness, Unit name: Psi-Sqrt(inch), Unit Symbol: psi-sqrt(in)

eFunda: Glossary: Units: Electric Resistance: Statohm
Other units in the category of Electric resistance include Abohm (emu of Resistance) (aW), Ohm (ohm, W), Siemens (resistance), and Volt Per Ampere (V/A). ...