3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

more free publications
Glossary » Units » Illuminance » Phot
Phot (ph) is a unit in the category of Illuminance. It is also known as phots. This unit is commonly used in the cgs unit system. Phot (ph) has a dimension of L-2J where L is length, and J is luminous intensity. It can be converted to the corresponding standard SI unit lx by multiplying its value by a factor of 10000.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Illuminance include Foot-Candle (ft-C, ft-cd, fc), and Lux (lx).

Additional Information
N/A
Related Pages
Glossary
3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.