Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Power Transmission

Gear drives, bearings, motors, clutches, couplings, machine controls, sensors and components.

Desktop Engineering

Design, simulation, test, prototyping and high performance computing.

Offshore

International news and technology for marine/offshore operations around the world.

more free magazines
Glossary » Units » Kinematic Viscosity » Square Inch Per Hour
Square Inch Per Hour (in2/h) is a unit in the category of Kinematic viscosity. It is also known as square inches per hour, square inch/hour, square inch/hr. This unit is commonly used in the UK, US unit systems. Square Inch Per Hour (in2/h) has a dimension of L2T-1 where L is length, and T is time. It can be converted to the corresponding standard SI unit m2/s by multiplying its value by a factor of 1.792111111E-007.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Kinematic viscosity include Centistokes (cSt), Square Centimeter Per Second (cm2/s), Square Foot Per Hour (ft2/h), Square Foot Per Second (ft2/s), Square Inch Per Second (in2/s), Square Meter Per Hour (m2/h), Square Meter Per Second (m2/s), and Stokes (St).

Additional Information
N/A
Related Pages
Glossary