Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

more free publications
Glossary » Units » Permeability Coefficient » Perm-Mil (23°C)
Perm-Mil (23°C) (perm-mil (23 °C)) is a unit in the category of Permeability coefficient. It is also known as perm mil. Perm-Mil (23°C) (perm-mil (23 °C)) has a dimension of T where T is time. It can be converted to the corresponding standard SI unit kg/Pa-m-s by multiplying its value by a factor of 1.45929E-015.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Permeability coefficient include Kilogram Meter Per Newton Per Second (kg-m/N-s), Perm-Inch (0°C) (perm-inch (0 °C)), Perm-Inch (23°C) (perm-inch (23 °C)), and Perm-Mil (0°C) (perm-mil (0 °C)).

Additional Information
N/A
Related Pages
Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.