Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

more free publications
Glossary » Units » Pressure » Inch of Mercury (0°C)
Inch of Mercury (0°C) (inHg (0 °C)) is a unit in the category of Pressure. It is also known as inches of mercury, inches of hg, inch of hg. This unit is commonly used in the UK, US unit systems. Inch of Mercury (0°C) (inHg (0 °C)) has a dimension of ML-1T-2 where M is mass, L is length, and T is time. It can be converted to the corresponding standard SI unit Pa by multiplying its value by a factor of 3386.383658.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Pressure include Atmosphere (metric) (at), Atmosphere (standard) (atm), Bar (bar), Barad (barad), Barye, CentiHg (0°C), Centimeter of Mercury (0°C) (cmHg (0 °C)), Centimeter of Water (4°C) (cmH2O), Dyne Per Square Centimeter (dyn/cm2), Foot of Water (4°C) (ft H2O), Gigapascal (GPa), Hectopascal (hPa), Inch of Mercury (15.56°C) (inHg (15.56 °C)), Inch of Water (15.56°C) (inH2O (15.56 °C)), Inch of Water (4°C) (inH2O (4 °C)), Kilogram Force Per Square Centimeter (kgf/cm2), Kilogram Force Per Square Decimeter (kgf/dm2), Kilogram Force Per Square Meter (kgf/m2), Kilogram Force Per Square Millimeter (kgf/mm2), Kilopascal (kPa), Kilopound Force Per Square Inch (kip/in2, ksi, KSI), Megapascal (MPa), Meter of Water (15.56°C) (mH2O, mCE (15.56 °C)), Meter of Water (4°C) (mH2O, mCE (4 °C)), Microbar (barye, Barrie) (µbar), Micron of Mercury (millitorr) (µHg (0 °C)), Millibar (mbar), Millimeter of Mercury (0°C) (mmHg, torr, Torr (0 °C)), Millimeter of Water (15.56°C) (mmH2O, mmCE (15.56 °C)), Millimeter of Water (4°C) (mmH2O, mmCE (4 °C)), Millitorr (mtorr), Newton Per Square Meter (N/m2), Ounce Force (av.) Per Square Inch (ozf/in2, osi), Pascal (Pa, N/m2), Pound Force Per Square Foot (lbf/ft2), Pound Force Per Square Inch (psi, PSI, lbf/in2), Poundal Per Square Foot (pdl/ft2), Poundal Per Square Inch (pdl/in2), Standard Atmosphere (atm), Ton Force (long) Per Square Foot (tonf/ft2 (UK)), Ton Force (long) Per Square Inch (tonf/in2 (UK)), Ton Force (metric) Per Square Centimeter (tonf/cm2 (metric)), Ton Force (metric) Per Square Meter (tonf/m2 (metric)), Ton Force (short) Per Square Foot (tonf/ft2 (US)), Ton Force (short) Per Square Inch (tonf/in2 (US)), and Torr (torr).

Additional Information
N/A
Related Pages
Glossary
Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.