Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

more free magazines
Glossary » Units » Surface Tension » Kilogram Force Per Meter
Kilogram Force Per Meter (kgf/m) is a unit in the category of Surface tension. It is also known as kilogram force per metre, kilogram force/meter, kilogram force/metre, kg/m. This unit is commonly used in the MKpS unit system. Kilogram Force Per Meter (kgf/m) has a dimension of MT-2 where M is mass, and T is time. It can be converted to the corresponding standard SI unit N/m by multiplying its value by a factor of 9.80665.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Surface tension include Dyne Per Centimeter (dyn/cm), Erg Per Square Centimeter (erg/cm2), Erg Per Square Millimeter (erg/mm2), Newton Per Meter (N/m), Ounce Force Per Foot (ozf/ft), Ounce Force Per Inch (ozf/in), Pound Force Per Foot (lbf/ft), Pound Force Per Inch (lbf/in), Poundal Per Foot (pdl/ft), and Poundal Per Inch (pdl/in).

Additional Information
N/A
Related Pages
Glossary
Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.