Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

more free publications
Glossary » Units » Surface Tension » Newton Per Meter
Newton Per Meter (N/m) is a unit in the category of Surface tension. It is also known as newtons per meter, newton per metre, newtons per metre, newton/meter, newton/metre. This unit is commonly used in the SI unit system. Newton Per Meter (N/m) has a dimension of MT-2 where M is mass, and T is time. This unit is the standard SI unit in this category.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Surface tension include Dyne Per Centimeter (dyn/cm), Erg Per Square Centimeter (erg/cm2), Erg Per Square Millimeter (erg/mm2), Kilogram Force Per Meter (kgf/m), Ounce Force Per Foot (ozf/ft), Ounce Force Per Inch (ozf/in), Pound Force Per Foot (lbf/ft), Pound Force Per Inch (lbf/in), Poundal Per Foot (pdl/ft), and Poundal Per Inch (pdl/in).

Additional Information
N/A
Related Pages
Glossary
Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.