Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

more free publications
Glossary » Units » Thermal Expansion Coefficient » Microinch Per Inch Per Fahrenheit Degree
Microinch Per Inch Per Fahrenheit Degree (µin/in-°F) is a unit in the category of Thermal expansion coefficient. It is also known as microinch/inch/deg F. Microinch Per Inch Per Fahrenheit Degree (µin/in-°F) has a dimension of Q-1 where Q is temperatur. It can be converted to the corresponding standard SI unit /K by multiplying its value by a factor of 1.8E-006.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Thermal expansion coefficient include Micron Per Meter Per Celsius Degree (µm/m-°C), Per Celsius Degree (/°C), Per Fahrenheit Degree (/°F), and Per Kelvin (/K).

Additional Information
N/A
Related Pages
Glossary
Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.