Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Negotiate Your Salary

Learn the best principles to negotiate the salary you deserve!

more free publications
Glossary » Units » Thermal Expansion Coefficient » Per Celsius Degree
Per Celsius Degree (/°C) is a unit in the category of Thermal expansion coefficient. It is also known as degrees, /degC, /deg C. This unit is commonly used in the INT unit system. Per Celsius Degree (/°C) has a dimension of Q-1 where Q is temperatur. It essentially the same as the corresponding standard SI unit /K.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Thermal expansion coefficient include Microinch Per Inch Per Fahrenheit Degree (µin/in-°F), Micron Per Meter Per Celsius Degree (µm/m-°C), Per Fahrenheit Degree (/°F), and Per Kelvin (/K).

Additional Information
N/A
Related Pages
Glossary
Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Negotiate Your Salary

Learn the best principles to negotiate the salary you deserve!