Power Transmission

Gear drives, bearings, motors, clutches, couplings, machine controls, sensors and components.

Quality Magazine

Techniques to improve quality on the shop floor and in manufacturing planning.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Offshore

International news and technology for marine/offshore operations around the world.

more free magazines
Glossary » Units » Thermal Expansion Coefficient » Per Fahrenheit Degree
Per Fahrenheit Degree (/°F) is a unit in the category of Thermal expansion coefficient. It is also known as degrees, /degF, /deg F. This unit is commonly used in the INT unit system. Per Fahrenheit Degree (/°F) has a dimension of Q-1 where Q is temperatur. It can be converted to the corresponding standard SI unit /K by multiplying its value by a factor of 1.8.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Thermal expansion coefficient include Microinch Per Inch Per Fahrenheit Degree (µin/in-°F), Micron Per Meter Per Celsius Degree (µm/m-°C), Per Celsius Degree (/°C), and Per Kelvin (/K).

Additional Information
N/A
Related Pages
Glossary