Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

more free publications
Glossary » Units » Thermal Resistance Coefficient » Tog
Tog (tog) is a unit in the category of Thermal resistance coefficient. It is also known as toes. This unit is commonly used in the UK unit system. Tog (tog) has a dimension of M-1T3Q where M is mass, T is time, and Q is temperatur. It can be converted to the corresponding standard SI unit K-m2/W by multiplying its value by a factor of 0.1.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Thermal resistance coefficient include Clo (clo), Kelvin Meter Squared Per Watt (K-m2/W), RSI (metric R-Value) (RSI), and R-Value (imperial) (°F-ft2-h/Btu (therm.)).

Additional Information
N/A
Related Pages
Glossary
Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.