Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

more free magazines
Glossary » Units » Volume Flow Rate » Cubic Meter Per Minute
Cubic Meter Per Minute (m3/min) is a unit in the category of Volume flow rate. It is also known as cubic meters per minute, cubic metre per minute, cubic metres per minute, cubic meter/minute, cubic metre/minute, flowrate. Cubic Meter Per Minute (m3/min) has a dimension of L3T-1 where L is length, and T is time. It can be converted to the corresponding standard SI unit m3/s by multiplying its value by a factor of 0.016666666667.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Volume flow rate include Acre Foot Per Month (acre-ft/month), Barrel (US, Liq.) Per Day (bbl (US, liq.)/day), Barrel (US, Petrol) Per Day (bbl (US, petrol)/day), Cubic Centimeter Per Second (cm3/s), Cubic Foot Per Minute (cfm, ft3/min), Cubic Foot Per Second (cfs, ft3/s), Cubic Inch Per Minute (in3/min), Cubic Inch Per Second (in3/s), Cubic Meter Per Hour (m3/h), Cubic Meter Per Second (m3/s), Cubic Yard Per Minute (yd3/min), Cumec (musec) (cumec), Gallon (UK) Per Day (gal (UK)/day), Gallon (UK) Per Hour (gph (UK)), Gallon (UK) Per Minute (gpm (UK)), Gallon (UK) Per Second (gps (UK)), Gallon (US, Liq.) Per Day (gal (US, liq.)/day), Gallon (US, Liq.) Per Hour (gph (US)), Gallon (US, Liq.) Per Minute (gpm (US)), Gallon (US, Liq.) Per Second (gps (US)), Liter Per Hour (l/h), Liter Per Minute (l/min), Liter Per Second (l/s), Lusec, and Miner'S Inch.

Additional Information
N/A
Related Pages
Glossary
Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.