Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

more free magazines
Glossary » Units » Volume Flow Rate » Cubic Yard Per Minute
Cubic Yard Per Minute (yd3/min) is a unit in the category of Volume flow rate. It is also known as cubic yards per minute, cubic yard/minute, flowrate. Cubic Yard Per Minute (yd3/min) has a dimension of L3T-1 where L is length, and T is time. It can be converted to the corresponding standard SI unit m3/s by multiplying its value by a factor of 0.01274258.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Volume flow rate include Acre Foot Per Month (acre-ft/month), Barrel (US, Liq.) Per Day (bbl (US, liq.)/day), Barrel (US, Petrol) Per Day (bbl (US, petrol)/day), Cubic Centimeter Per Second (cm3/s), Cubic Foot Per Minute (cfm, ft3/min), Cubic Foot Per Second (cfs, ft3/s), Cubic Inch Per Minute (in3/min), Cubic Inch Per Second (in3/s), Cubic Meter Per Hour (m3/h), Cubic Meter Per Minute (m3/min), Cubic Meter Per Second (m3/s), Cumec (musec) (cumec), Gallon (UK) Per Day (gal (UK)/day), Gallon (UK) Per Hour (gph (UK)), Gallon (UK) Per Minute (gpm (UK)), Gallon (UK) Per Second (gps (UK)), Gallon (US, Liq.) Per Day (gal (US, liq.)/day), Gallon (US, Liq.) Per Hour (gph (US)), Gallon (US, Liq.) Per Minute (gpm (US)), Gallon (US, Liq.) Per Second (gps (US)), Liter Per Hour (l/h), Liter Per Minute (l/min), Liter Per Second (l/s), Lusec, and Miner'S Inch.

Additional Information
N/A
Related Pages
Glossary
Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.