3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

more free publications
Glossary » Units » Volume Flow Rate » Gallon (UK) Per Hour
Gallon (UK) Per Hour (gph (UK)) is a unit in the category of Volume flow rate. It is also known as gal/hour, gallon/hour, gallon per hour, gallons per hour, gallon/hr, gal/hr, flowrate. This unit is commonly used in the UK unit system. Gallon (UK) Per Hour (gph (UK)) has a dimension of L3T-1 where L is length, and T is time. It can be converted to the corresponding standard SI unit m3/s by multiplying its value by a factor of 1.26280333333E-006.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Volume flow rate include Acre Foot Per Month (acre-ft/month), Barrel (US, Liq.) Per Day (bbl (US, liq.)/day), Barrel (US, Petrol) Per Day (bbl (US, petrol)/day), Cubic Centimeter Per Second (cm3/s), Cubic Foot Per Minute (cfm, ft3/min), Cubic Foot Per Second (cfs, ft3/s), Cubic Inch Per Minute (in3/min), Cubic Inch Per Second (in3/s), Cubic Meter Per Hour (m3/h), Cubic Meter Per Minute (m3/min), Cubic Meter Per Second (m3/s), Cubic Yard Per Minute (yd3/min), Cumec (musec) (cumec), Gallon (UK) Per Day (gal (UK)/day), Gallon (UK) Per Minute (gpm (UK)), Gallon (UK) Per Second (gps (UK)), Gallon (US, Liq.) Per Day (gal (US, liq.)/day), Gallon (US, Liq.) Per Hour (gph (US)), Gallon (US, Liq.) Per Minute (gpm (US)), Gallon (US, Liq.) Per Second (gps (US)), Liter Per Hour (l/h), Liter Per Minute (l/min), Liter Per Second (l/s), Lusec, and Miner'S Inch.

Additional Information
N/A
Related Pages
3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.