Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Selecting the Right 3D Printer

Discover how to choose the right 3D printer for your needs and the key performance attributes to consider.

more free publications
Glossary » Units » Volume Flow Rate » Gallon (US, Liq.) Per Second
Gallon (US, Liq.) Per Second (gps (US)) is a unit in the category of Volume flow rate. It is also known as gallon per second, gal/second, gallon/second, gallons per second, flowrate. This unit is commonly used in the US unit system. Gallon (US, Liq.) Per Second (gps (US)) has a dimension of L3T-1 where L is length, and T is time. It can be converted to the corresponding standard SI unit m3/s by multiplying its value by a factor of 0.003785411784.
Note that the seven base dimensions are M (Mass), L (Length), T (Time), Q (Temperature), N (Aamount of Substance), I (Electric Current), and J (Luminous Intensity).

Other units in the category of Volume flow rate include Acre Foot Per Month (acre-ft/month), Barrel (US, Liq.) Per Day (bbl (US, liq.)/day), Barrel (US, Petrol) Per Day (bbl (US, petrol)/day), Cubic Centimeter Per Second (cm3/s), Cubic Foot Per Minute (cfm, ft3/min), Cubic Foot Per Second (cfs, ft3/s), Cubic Inch Per Minute (in3/min), Cubic Inch Per Second (in3/s), Cubic Meter Per Hour (m3/h), Cubic Meter Per Minute (m3/min), Cubic Meter Per Second (m3/s), Cubic Yard Per Minute (yd3/min), Cumec (musec) (cumec), Gallon (UK) Per Day (gal (UK)/day), Gallon (UK) Per Hour (gph (UK)), Gallon (UK) Per Minute (gpm (UK)), Gallon (UK) Per Second (gps (UK)), Gallon (US, Liq.) Per Day (gal (US, liq.)/day), Gallon (US, Liq.) Per Hour (gph (US)), Gallon (US, Liq.) Per Minute (gpm (US)), Liter Per Hour (l/h), Liter Per Minute (l/min), Liter Per Second (l/s), Lusec, and Miner'S Inch.

Additional Information
N/A
Related Pages
Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Selecting the Right 3D Printer

Discover how to choose the right 3D printer for your needs and the key performance attributes to consider.