 |
 |
 |
Metal Alloys |
|
Alloy Home |
|
Steels |
|
Alloy Steels |
|
General Information |
| Properties | |
|
Classification |
|
Standard |
|
H-Steels |
|
HSLA |
|
Alloy Steel List |
| AISI 1xxx | |
| AISI 2xxx | |
| AISI 3xxx | |
| AISI 4xxx | |
| AISI 5xxx | |
| AISI 6xxx | |
| AISI 8xxx | |
| AISI 9xxx | |
| * | For other AISI or Non-AISI, please use the search function above or check Grades. |
| ASTM Steels | |
|
Specific Alloy Steel |
|
General Information |
|
Further Details |
|
Resources |
|
Bibliography |
| AISI 8660 | |
 | |
| Conditions | Tensile Properties | ||
| T (°C) | Treatment | ||
| 25 | oil quenched, fine grained, tempered at 425°C | Tensile Strength (MPa) | 1634 |
| Yield Strength (MPa) | 1551 | ||
| Elongation (%) | 13 | ||
| Reduction in Area (%) | 37 | ||
| 25 | oil quenched, fine grained, tempered at 540°C | Tensile Strength (MPa) | 1310 |
| Yield Strength (MPa) | 1213 | ||
| Elongation (%) | 17 | ||
| Reduction in Area (%) | 46 | ||
| 25 | oil quenched, fine grained, tempered at 650°C | Tensile Strength (MPa) | 1068 |
| Yield Strength (MPa) | 951 | ||
| Elongation (%) | 20 | ||
| Reduction in Area (%) | 53 | ||
A white paper to assist in the evaluation of 3D scanning hardware solutions.
Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.
Optimize your designs, reduce machining time, and lower your costs.
Wages, employment opportunities, and growth projections for STEM jobs.
