 |
 |
 |
Metal Alloys |
|
Alloy Home |
|
Copper Alloys |
|
General Information |
| Properties | |
Cu Alloy Types |
|
Cast Alloys |
| Wrought Alloys |
|
Cu Alloy List |
| UNS C1xxxx | |
| UNS C2xxxx | |
| UNS C3xxxx | |
| UNS C4xxxx | |
| UNS C5xxxx | |
| UNS C6xxxx | |
| UNS C7xxxx | |
| UNS C8xxxx | |
| UNS C9xxxx | |
|
Specific Cu Alloy |
|
General Information |
|
Resources |
|
Bibliography |
| UNS C46700 | |
 | |
| Category | Copper Alloy |
| Class | Wrought |
| Type | Naval brass |
| Common Names | Copper-zinc brass |
| Designations | United States: UNS C46700 |
| Composition | |
| |
| Mechanical Properties | |
| |
| Properties | Conditions | ||
| T (°C) | Treatment | ||
| Density (×1000 kg/m3) | 8.8-8.94 | 25 | |
| Poisson's Ratio | 0.34 | 25 | |
| Elastic Modulus (GPa) | 117 | 25 | |
| Tensile Strength (Mpa) | 379-607 | 25 | (flat products, rod, tube, shapes) more |
| Yield Strength (Mpa) | 172-455 | ||
| Elongation (%) | 50 | ||
| Reduction in Area (%) | |||
| Note: Elongation is measured in 17 inches. | |||
A white paper to assist in the evaluation of 3D scanning hardware solutions.
Guide for high quality and cost-effective plastic injection molding.
Wages, employment opportunities, and growth projections for STEM jobs.
Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.
