 |
 |
 |
Metal Alloys |
|
Alloy Home |
|
Copper Alloys |
|
General Information |
| Properties | |
Cu Alloy Types |
|
Cast Alloys |
| Wrought Alloys |
|
Cu Alloy List |
| UNS C1xxxx | |
| UNS C2xxxx | |
| UNS C3xxxx | |
| UNS C4xxxx | |
| UNS C5xxxx | |
| UNS C6xxxx | |
| UNS C7xxxx | |
| UNS C8xxxx | |
| UNS C9xxxx | |
|
Specific Cu Alloy |
|
General Information |
|
Resources |
|
Bibliography |
| UNS C95800 | |
 | |
| Category | Copper Alloy |
| Class | Cast |
| Type | Nickel-aluminum bronze |
| Designations | United States: UNS C95800, ASTM B148 |
| Composition | |
| |
| Mechanical Properties | |
| |
| Properties | Conditions | ||
| T (°C) | Treatment | ||
| Density (×1000 kg/m3) | 8.8-8.94 | 25 | |
| Poisson's Ratio | 0.34 | 25 | |
| Elastic Modulus (GPa) | 117 | 25 | |
| Tensile Strength (Mpa) | 655 | 25 | (castings: centrifugal, continuous, permanent mold, plaster, sand) |
| Yield Strength (Mpa) | 262 | ||
| Elongation (%) | 25 | ||
| Reduction in Area (%) | |||
| Hardness (HB) | 159 | 25 | (as cast) |
Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.
Information, coverage of important developments and expert commentary in manufacturing.
Optimize your designs, reduce machining time, and lower your costs.
A white paper to assist in the evaluation of 3D scanning hardware solutions.
