 |
 |
 |
Metal Alloys |
|
Alloy Home |
|
Magnesium Alloys |
|
General Information |
| Properties | |
| Temper | |
|
Mg Alloys List |
|
All |
|
Castings |
|
Bars and Shapes |
|
Sheets and Plates |
|
Specific Mg Alloy |
|
General Information |
|
Resources |
|
Bibliography |
| ASTM AZ10A-F | |
 | |
| Category | Magnesium Alloy |
| Designations | United States: UNS S45500, ASTM A313 (XM-16) |
| Composition | |
| |
| Mechanical Properties | |
| |
| Properties | Conditions | ||
| T (°C) | Treatment | ||
| Density (×1000 kg/m3) | 1.77-1.83 | 25 | |
| Poisson's Ratio | 0.35 | 25 | |
| Elastic Modulus (GPa) | 44.8 | 25 | |
| Tensile Strength (Mpa) | 240.0 | 25 | F (extruded bars and shapes) |
| Yield Strength (Mpa) | 145.0 (69.0) | ||
| Elongation (%) | 10.0 | ||
| Reduction in Area (%) | |||
| Note: Value in parentheses indicates yield strength for compression. | |||
Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.
A white paper to assist in the evaluation of 3D scanning hardware solutions.
Discover how to choose the right 3D printer for your needs and the key performance attributes to consider.
Guide for high quality and cost-effective plastic injection molding.
