 |
 |
 |
Metal Alloys |
|
Alloy Home |
|
Magnesium Alloys |
|
General Information |
| Properties | |
| Temper | |
|
Mg Alloys List |
|
All |
|
Castings |
|
Bars and Shapes |
|
Sheets and Plates |
|
Specific Mg Alloy |
|
General Information |
|
Resources |
|
Bibliography |
| ASTM ZK21A-F | |
 | |
| Category | Magnesium Alloy |
| Composition | |
| |
| Mechanical Properties | |
| |
| Properties | Conditions | ||
| T (°C) | Treatment | ||
| Density (×1000 kg/m3) | 1.77-1.83 | 25 | |
| Poisson's Ratio | 0.35 | 25 | |
| Elastic Modulus (GPa) | 44.8 | 25 | |
| Tensile Strength (Mpa) | 260.0 | 25 | F (extruded bars and shapes) |
| Yield Strength (Mpa) | 195.0 (135.0) | ||
| Elongation (%) | 4.0 | ||
| Reduction in Area (%) | |||
| Note: Value in parentheses indicates yield strength for compression. | |||
Guide for high quality and cost-effective plastic injection molding.
Optimize your designs, reduce machining time, and lower your costs.
Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.
Information, coverage of important developments and expert commentary in manufacturing.
