 |
 |
 |
Metal Alloys |
|
Alloy Home |
|
Magnesium Alloys |
|
General Information |
| Properties | |
| Temper | |
|
Mg Alloys List |
|
All |
|
Castings |
|
Bars and Shapes |
|
Sheets and Plates |
|
Specific Mg Alloy |
|
General Information |
|
Resources |
|
Bibliography |
| ASTM ZK40A-T5 | |
 | |
| Category | Magnesium Alloy |
| Composition | |
| |
| Mechanical Properties | |
| |
| Properties | Conditions | ||
| T (°C) | Treatment | ||
| Density (×1000 kg/m3) | 1.77-1.83 | 25 | |
| Poisson's Ratio | 0.35 | 25 | |
| Elastic Modulus (GPa) | 44.8 | 25 | |
| Tensile Strength (Mpa) | 276.0 | 25 | T5 (extruded bars and shapes) |
| Yield Strength (Mpa) | 255.0 (140.0) | ||
| Elongation (%) | 4.0 | ||
| Reduction in Area (%) | |||
| Note: Value in parentheses indicates yield strength for compression. | |||
Guide for high quality and cost-effective plastic injection molding.
Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.
Guide for those interested in becoming a mechanical engineer. Includes qualifications, pay, and job duties.
A white paper to assist in the evaluation of 3D scanning hardware solutions.
