 |
 |
 |
Metal Alloys |
|
Alloy Home |
|
Steels |
|
Stainless Steels |
|
General Information |
| Properties | |
|
Stainless Stl. Grades |
|
Austenitic |
|
Martensitic |
|
Ferritic |
|
Precipitation Hardening |
|
Stainless Steel List |
| AISI Type 2xx | |
| AISI Type 3xx | |
| AISI Type 4xx | |
| AISI Type 5xx | |
| AISI Type 6xx | |
| * | For other AISI or Non-AISI, please use the search function above or check Grades. |
|
Specific Stainless Stl |
|
TM">General Information |
|
Further Details |
|
Resources |
|
Bibliography |
| 18-18PlusTM | |
 | |
| Conditions | Tensile Properties | ||
| T (°C) | Treatment | ||
| 25 | annealed (wire) | Tensile Strength (MPa) | 635 |
| Yield Strength (MPa) | |||
| Elongation (%) | |||
| Reduction in Area (%) | |||
| 25 | annealed (bar) | Tensile Strength (MPa) | 760 |
| Yield Strength (MPa) | 415 | ||
| Elongation (%) | 35 | ||
| Reduction in Area (%) | 55 | ||
| 25 | annealed (bar) | Tensile Strength (MPa) | 825 |
| Yield Strength (MPa) | 450 | ||
| Elongation (%) | 60 | ||
| Reduction in Area (%) | 70 | ||
Optimize your designs, reduce machining time, and lower your costs.
Guide for high quality and cost-effective plastic injection molding.
Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.
A white paper to assist in the evaluation of 3D scanning hardware solutions.
