 |
 |
 |
Metal Alloys |
|
Alloy Home |
|
Titanium Alloys |
|
General Information |
|
Properties |
|
Ti Alloys List |
|
All |
|
Commercially Pure |
|
Alpha Alloys |
|
Near Alpha Alloys |
|
Alpha-Beta Alloys |
|
Beta Alloys |
|
Specific Ti Alloy |
|
General Information |
|
Resources |
|
Bibliography |
| Ti-13V-11Cr-3Al | |
 | |
| Category | Titanium Alloy |
| Class | Wrought |
| Type | Beta alloy |
| Designations | United States: MIL-T-9046, AMS 4917 |
| Composition | |
| |
| Mechanical Properties | |
| |
| Properties | Conditions | ||
| T (°C) | Treatment | ||
| Density (×1000 kg/m3) | 4.84 | 25 | |
| Poisson's Ratio | 0.3 | 25 | |
| Elastic Modulus (GPa) | 101.4 | 25 | |
| Tensile Strength (Mpa) | 1276 | 25 | solution+age |
| Yield Strength (Mpa) | 1207 | ||
| Elongation (%) | 8 | ||
| Reduction in Area (%) | |||
| Hardness (HRC) | 40 | 25 | solution+age |
| Impact Strength (J) (Charpy) |
11 | 25 | solution+age |
| Thermal Properties | |
| |
A white paper to assist in the evaluation of 3D scanning hardware solutions.
Guide for high quality and cost-effective plastic injection molding.
Optimize your designs, reduce machining time, and lower your costs.
Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.
