Chemical Engineering

The industry gateway for chemical engineering and plant operations.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Laser Focus World

Semiconductors, medical equipment, lasers, optics and aviation and aerospace.

Negotiate Your Salary

Learn the best principles to negotiate the salary you deserve!

more free magazines
Introduction

Properties of common liquid materials are divided into following categories:

 

  • Physical properties: Density, melting and boiling temperature.
• Mechanical Properties: Poisson's Ratio, bulk modulus, viscousity, kinematic viscousity.
• Thermal Properties: Coefficient of thermal expansion, thermal conductivity.
• Electric Properties: Electric resistivity.
• Acoustic Properties: Sound velocity.
 

  Note: 1. All properties are under 1 atm (1.01325×105 Pa; 760 mmHg; 14.6959 psi) and at room temperature 25 ºC (77 ºF) unless specified otherwise.
  2. Further information on a specific material can be obtained by clicking the name of that particular material in the following table.
  3. Users who prefer Standard or other unit systems rather than the SI units, click the amount (number) of the specific material property for unit conversion.
  4. Materials in different phases at room temperature: Solid, Gas.
Physical Properties
Material Density
(×1000 kg/m3)
Melting Point
(ºC)
Boiling Point
(ºC)
Acetone [C3H6O] (20 ºC) 0.7899 -94.85 56.05
Alcohol; Ethanol [C2H5OH] (20 ºC) 0.789 -114.2 78.29
Alcohol; Methanol [CH3OH] (20 ºC) 0.792 -97.68 64.55
Mercury [Hg] (20 ºC) 13.579 -38.83 356.7
Oil; Mineral 0.92 - -
Oil; Olive 0.92 -6.00 -
Oil; Petroleum 0.82 - -
Water; Distilled [H2O] (20 ºC) 0.998 0 100.0
Water; Distilled [H2O] (25 ºC) 0.997 0 100.0
Water; Distilled [H2O] (4 ºC) 1 0 100.0
Water; Sea (13 ºC) 1.024 - -
Glossary