eFunda Polymers: Listing of Fluoroplastics (Teflon)

Introduction

Fluoroplastics, also known as PTFE, or FEP, PFA, CTFE, ECTFE, ETFE, has been mass-produced since 1950.
-	It is a thermoplastic polymer.
-	Applications: PTFE is commonly used in applications needing excellent dielectric strength and chemical and temperature resistance.
-	General properties: It has low mechanical strength and is expensive. It has very low coefficient of friction.
-	Trade Name: Teflon.

Specific Grades of Fluoroplastics

1.	Fluoroplastics, poly(chloro-trifluoro-ethylene).
2.	Fluoroplastics, PTFE, granular.
3.	Fluoroplastics, PTFE, 25% glass fiber reinforced.
4.	Fluoroplastics, perfluoro-alkoxyalkane (PFA).
5.	Fluoroplastics, fluorinated ethylene propylene, unfilled.
6.	Fluoroplastics, fluorinated ethylene propylene, 20% milled glass fiber.
7.	Fluoroplastics, poly(vinyl fluoride), unfilled, film.
8.	Fluoroplastics, poly(vinyl fluoride), filled, film.
9.	Fluoroplastics, poly(vinylidene fluoride), molding and extrusion.
10.	Fluoroplastics, poly(vinylidene fluoride), wire and cable jacketing.
11.	Fluoroplastics, poly(vinylidene fluoride), 30% PAN carbon fiber, EMI shilding (conductive).
12.	Fluoroplastics, modified PE-TFE, unfilled.
13.	Fluoroplastics, modified PE-TFE, 25% glass fiber reinforced.
14.	Fluoroplastics, THV-200.
15.	Fluoroplastics, THV-400.
16.	Fluoroplastics, THV-500.
17.	Fluoroplastics, PE-CTFE.

Glossary

Information, coverage of important developments and expert commentary in manufacturing.

8 things to know about the interview question "What's your salary expectation"?

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Learn the best principles to negotiate the salary you deserve!