Units Currencies
Constants
Units Home
Unit Conversion
List Units
List Categories
Currencies
Convert Units
SI System
Base Units
Derived Units
Prefixes
Numbers
Constants
Base-N
Fractions
Time / Decimal
Resources
Bibliography
CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Mechanical Engineers Outlook

Guide for those interested in becoming a mechanical engineer. Includes qualifications, pay, and job duties.

more free publications
 
acre
Symbol:  ac, acre 
Category:  Area 
SI Equivalent:  4046.86 m2
Dimension L2 
System:  UK, US, CAN 
 
Notes
British unit of area used in surveyor's measurements. This is the English statute acre, and the US statute acre is the same. The acre was first defined in England in the reign of Edward I and is thought to be the area which a yoke of oxen could plow in a day. The acre was limited to its present definite quantity by statutes of Edward I, Edward III, and Henry VIII.
1 acre =1/640 square mile
  =4 roods
  =10 square chains (Gunter's)
  =160 square rods
  =4840 square yards
Convert     ac, acre  
57 conversions, showing those commonly used | Show all
1 ac, acre =
Area
  Symbol Unit Name
4.04686×1031  b  barn 
0.404686  ha  hectare 
4.04686×107  cm2  square centimeter 
4.356×104  ft2  square foot 
0.404686  hm2  square hectometer 
6.27264×106  in2, sq. in  square inch 
4.04686×10-3  km2  square kilometer 
4046.86  m2  square meter 
4.04686×1015  µm2  square micrometer 
6.27264×1012  mil2  square mil (thou) 
1.56249×10-3  sq. mi. (int.)  square mile (int.) 
4.04686×109  mm2  square millimeter 
4840  yd2, sq. yd  square yard 
more...
Glossary
CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Mechanical Engineers Outlook

Guide for those interested in becoming a mechanical engineer. Includes qualifications, pay, and job duties.