Units Currencies
Constants
Units Home
Unit Conversion
List Units
List Categories
Currencies
Convert Units
SI System
Base Units
Derived Units
Prefixes
Numbers
Constants
Base-N
Fractions
Time / Decimal
Resources
Bibliography
Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Salary Expectation

8 things to know about the interview question "What's your salary expectation"?

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

more free publications

Materials

Design

Processes

Units

Formulas

Math
 
cubic centimeter per second
Symbol:  cm3/s 
Category:  Volume flow rate 
SI Equivalent:  10×10-7 m3/s
Dimension:  L3T-1 
Convert     cm3/s  
1 cm3/s =
Volume flow rate
  Symbol Unit Name
2.13055×10-3  acre-ft/month  acre foot per month 
0.724586  bbl (US, liq.)/day  barrel (US, liq.) per day 
0.54344  bbl (US, petrol)/day  barrel (US, petrol) per day 
2.11888×10-3  cfm, ft3/min  cubic foot per minute 
3.53147×10-5  cfs, ft3/s  cubic foot per second 
3.66142  in3/min  cubic inch per minute 
6.10237×10-2  in3/s  cubic inch per second 
3.6×10-3  m3/h  cubic meter per hour 
6×10-5  m3/min  cubic meter per minute 
10×10-7  m3/s  cubic meter per second 
7.8477×10-5  yd3/min  cubic yard per minute 
10×10-7  cumec  cumec (musec) 
19.0053  gal (UK)/day  gallon (UK) per day 
0.791889  gph (UK)  gallon (UK) per hour 
1.31981×10-2  gpm (UK)  gallon (UK) per minute 
2.19969×10-4  gps (UK)  gallon (UK) per second 
22.8245  gal (US, liq.)/day  gallon (US, liq.) per day 
0.951019  gph (US)  gallon (US, liq.) per hour 
1.58503×10-2  gpm (US)  gallon (US, liq.) per minute 
2.64172×10-4  gps (US)  gallon (US, liq.) per second 
3.6  l/h  liter per hour 
6×10-2  l/min  liter per minute 
10×10-4  l/s  liter per second 
10×10-4    lusec 
1.41259×10-3    miner's inch 
Glossary
FREE Publications
Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Salary Expectation

8 things to know about the interview question "What's your salary expectation"?

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

more publications