Units Currencies
Constants
Units Home
Unit Conversion
List Units
List Categories
Currencies
Convert Units
SI System
Base Units
Derived Units
Prefixes
Numbers
Constants
Base-N
Fractions
Time / Decimal
Resources
Bibliography
Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

more free magazines
 
cubic kilometer
Symbol:  km3 
Category:  Volume 
SI Equivalent:  1×109 m3
Dimension L3 
System:  SI 
Convert     km3  
94 conversions, showing those commonly used | Show all
1 km3 =
Volume
  Symbol Unit Name
8.38641×109  bbl (US, liq.)  barrel (US, liq.) 
6.28981×109  bbl (US, petrol)  barrel (US, petrol) 
2.83776×1010  bu (US, dry)  bushel (US, dry) 
1×1015  cm3  cubic centimeter 
3.53147×1010  ft3  cubic foot 
6.10237×1013  in3  cubic inch 
1×109  m3  cubic meter 
1×1018  mm3  cubic millimeter 
1.30795×109  yd3  cubic yard 
4.22675×1012  cup (US, liq.)  cup (US, liq.) 
2.64172×1011  gal (US, liq.)  gallon (US, liq.) 
10×1011  L, l  liter 
1×1018  ┬Ál  microliter 
3.51951×1013  fl oz (UK)  ounce (UK, liq.) 
3.3814×1013  fl oz (US)  ounce (US, liq.) 
1.81617×1012  pt (US, dry)  pint (US, dry) 
2.11338×1012  pt (US, liq.)  pint (US, liq.) 
9.08083×1011  qt (US, dry)  quart (US, dry) 
1.05669×1012  qt (US, liq.)  quart (US, liquid) 
6.7628×1013    tablespoon (US) 
2.02884×1014    teaspoon (US) 
more...
Glossary
Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.